• Clean and sanitize classrooms, hallways, restrooms, cafeterias, offices, and other school areas.
• Sweep, mop, vacuum, and buff floors.
• Empty trash and recycling receptacles and dispose of waste properly.
• Refill supplies such as soap, paper towels, and toilet paper in restrooms and common areas.
• Perform minor maintenance tasks such as changing light bulbs, unclogging drains, and basic repair work.
• Monitor the security of school buildings and grounds during assigned shifts.
• Set up and break down equipment and furniture for events and school functions.
• Report any safety hazards, damage, or needed repairs to appropriate personnel.
• Follow all safety procedures and guidelines for cleaning chemicals and equipment.
• Ensure exterior school areas (sidewalks, entrances) are clean and hazard-free, including snow removal or salting as needed.

• High school diploma or equivalent preferred.
• Prior custodial or janitorial experience preferred.
• Knowledge of cleaning methods, materials, and equipment.
• Ability to lift up to 50 lbs and perform physical tasks such as bending, standing, and walking for extended periods.
• Ability to work independently and as part of a team.
• Basic understanding of safety and sanitation regulations.
• Must pass background checks as required for working in a school environment.

Join our team and help build the roads that keep our communities moving. We’re looking for a dedicated Asphalt Laborer who thrives in a hands-on, team-oriented environment and takes pride in doing quality work that lasts.

 Key Responsibilities:

Tool & Equipment Handling

• Unload trucks and gather tools for daily tasks

• Transport rakes, lutes, shovels, and spray cans to paver areas

Operational Support

• Move pavement saws to transverse joints when needed

• Sweep and clean work areas ahead of paving

• Accurately measure and mark areas for paving each day

Traffic & Safety Management

• Serve as a Flagger to guide motorists around work zones safely

Logistical Coordination

• Transport water to rollers, power brooms, and plate compactors

• Assist in creating a stable launchpad for the paver

Team Collaboration

• Support the screed operator with essential tasks

• Shovel materials effectively to the end gate

End-of-Day Duties

• Maintain a clean worksite by sweeping and storing equipment

Qualifications:

Education & Experience

• High school diploma or GED required

• Previous experience as an asphalt laborer or flagger 

Skills

• Knowledge of road and traffic safety regulations

• Strong communication, teamwork, and attention to detail

Flexibility

• Willingness to work weekends, holidays, and night shifts as needed

• Must be able to travel to various job sites

Physical Requirements

• Ability to work long hours in all types of weather

• Must be able to stand for extended periods and perform physical labor
  
  

Ready to get to work?
Apply now and become part of a company that values hard work, safety, and quality craftsmanship.

• Work as part of a team to move, organize, and load products in our refrigerated and freezer areas
• Staying active and engaged in a cold environment throughout your shift
• Communicating with other team members to keep operations running smoothly
• Maintaining a clean environment 
• Executing tasks efficiently and on time

• 2 Years of Manufacturing preferred 
• Steel toes / Composites
• Experience with shipping and receiving

Bobcat Operator / Asphalt Paving Grade Crew Foreman

Job Summary:
We are currently seeking a skilled and experienced Bobcat Operator to take on the role of Asphalt Paving Grade Crew Foreman. This position is ideal for a motivated individual with strong leadership capabilities and hands-on experience in grading or excavation work.

Key Responsibilities:

• Operate a Bobcat Skid Steer with various attachments (forks, bucket, grader, etc.) with efficiency and precision

• Supervise and lead a small crew (1–3 members), ensuring quality and productivity

• Oversee jobsite safety and ensure employees follow safety protocols

• Maintain communication with team members to coordinate daily tasks and progress

• Perform or assist in grading and excavation work as needed

Requirements:

• Valid CDL-A license required

• Proven ability to operate Bobcat equipment with multiple attachments

• Strong leadership and team management skills

• Prior grading or excavation experience is required

• Commitment to safety and jobsite supervision

• Lift and load racks weighing up to 45 lbs onto a conveyor belt each morning.
• Hang parts onto the racks properly for painting while ensuring no dust or debris is present.
• Safely blow off each piece using a blow gun to ensure cleanliness before painting.
• Return racks to their original location at the end of the day.
• Perform cleaning and unloading of parts as needed.

• Overtime until 4:00 pm on weekdays  
• Voluntary overtime on Saturdays until it becomes mandatory (1.5x pay)  
• Overtime on Sundays for hired employees only (2.0x pay)  

• Strong candidates who are able to lift and change racks.
• Must be able to speak and understand English (no translation available).
• Able to lift and load racks weighing up to 40 lbs.
• Candidates with no violent or sexual criminal background older than 7 years.

• Conduct thorough inspections of products and materials against established quality standards and specifications.  
• Document inspection results, identifying defects and areas for improvement.  
• Prepare detailed reports of inspection findings and communicate them to relevant stakeholders.   
• Collaborate with production and quality assurance teams to address quality issues and implement corrective actions.  
• Perform audits and assessments of production processes to ensure compliance with quality protocols.  
• Provide feedback and recommendations for continuous improvement based on inspection data.  
• Maintain accurate records of inspections, including photos and sample retainment's, for traceability and reporting purposes.  
• Stay updated on industry standards, regulations, and best practices related to quality assurance.  

• High school diploma or equivalent; additional technical certifications or training in quality assurance is a plus.  
• Prior experience in quality inspection or assurance, preferably in a manufacturing environment.  
• Strong attention to detail and problem-solving skills.  
• Excellent written and verbal communication skills.  
• Ability to work independently as well as part of a team.  
• Proficiency in using measuring instruments and quality inspection tools.  

• Ability to lift and move items weighing up to 20lbs.  
• Comfortable standing for extended periods and performing repetitive tasks.  

• Operate laser cutting machines to produce metal components as per blueprints/specifications.
• Use precision measuring tools, including pin gauges and calipers.
• Perform preventative maintenance and troubleshoot laser cutting machines and other equipment.
• We seek individuals with a strong work ethic and a sense of urgency.

• Bystronic Fiber 12,000 Watt
• Bystronic Bystar 4,400 Watt
• Coherent 1,000 Watt
• ByTube Star (Tube Laser)

• Free lunch every Thursday
• Participation in company events/outings
• This is a permanent position, not a temporary placement

• Move, measure, cut, and assemble materials such as OSB, 2"x4" lumber, and pallets to construct crates.
• Operate tools including tape measures, electric and hand saws, air nailers and staplers, hammers, screwdrivers, and more.
• Safely operate a forklift (hilo), with appropriate licensing.

• Load and unload goods from trucks, trailers, and other transport vehicles.
• Handle some goods manually, ensuring careful movement and placement.
• Use forklifts (hilo) and overhead cranes, requiring appropriate licensing.
• Verify and manage incoming and outgoing paperwork to ensure accurate documentation.

• Be prepared to perform additional tasks throughout the facility and grounds as necessary.

• Proficiency in operating a variety of tools and equipment.
• Strong organizational skills for handling shipping and receiving activities.
• Valid forklift (hilo) license and experience operating an overhead crane.

• Operate the molding machine according to Work Instructions and as directed by the Lead Operator, Technician, and/or Supervisor.  
• Inspect molded parts for cosmetic defects in accordance with the Inspection Instruction Sheet.  
• Communicate any molding problems or issues to the Technician, Supervisor, or Lead Operator.   
• Relay any special instructions or quality issues to other shifts.  
• Maintain a clean work area and assist in keeping the Molding Department organized and orderly.   
• Assist the Lead Operator by relieving other operators during break times.  
• Perform other related duties as needed, including annealing of parts and organizing boxed and bagged parts.  

• Ability to follow detailed instructions and work within a team.  
• Strong attention to detail for quality inspection.  
• Good communication skills for effective interaction with team members.  
• Basic understanding of plastic injection molding processes is preferred but not required.  

Key Responsibilities:

• Set up and operate automatic die cutting machines according to job specifications and production schedules
• Adjust machine settings for optimal performance, ensuring precision cuts and quality standards are met
• Perform quality checks throughout the production run to identify and correct any defects or inconsistencies
• Maintain accurate production records, including material usage and output
• Troubleshoot and resolve minor mechanical or performance issues with the machine
• Perform routine maintenance and cleaning of the die cutter to ensure safe and efficient operation
• Read and interpret work orders, blueprints, and job specifications
• Work closely with team members and supervisors to meet production goals and deadlines
• Follow all safety protocols and company policies to maintain a clean and hazard-free work environment

Qualifications:

• High school diploma or equivalent
• Prior experience operating an automatic die cutting machine preferred
• Basic mechanical aptitude
• Ability to read and interpret technical drawings and work instructions
• Strong attention to detail and commitment to quality
• Ability to work independently and as part of a team
• Good communication skills and a positive attitude